Qualify a Chinese robotics component supplier by testing a clearly specified part under your robot's operating conditions, then checking whether the supplier can reproduce that performance and support design changes. European robot manufacturers should connect engineering tests with production evidence before committing a component to a platform.
During two weeks visiting companies in Germany this summer, I came away more optimistic about cooperation with China. In my July reflection, the opportunity I singled out was robotics, especially the engineering experience inside automotive supplier networks. That experience becomes useful when teams turn it into a shared technical problem.
My name is Thomas Derksen, founder of Asiabits. For a European robot builder considering Chinese components, the question is practical: what would persuade your engineers to put this particular part into the next prototype? Answering that question gives a supplier discussion a purpose and makes competing proposals easier to compare.
What should you specify before contacting suppliers?
Specify the job the component must do inside your robot, including the conditions under which it must keep doing it. A product category such as motor, reducer or force sensor leaves too much open for a meaningful technical comparison.
For a joint actuator, which combines the parts that generate and transmit movement, describe the expected movement and loading. Separate brief peak demands from sustained operation. Include installation dimensions, available power and the surrounding structure that carries heat away. A compact part may need a different cooling arrangement from the one used for its published test.
For a sensor, define what the robot needs to measure and how that measurement reaches the controller. Specify the expected environment and the conditions for calibration. Give the supplier enough context to explain whether its standard product fits or whether a development project is required.
Make the operating profile readable. A drawing, a description of a repeated movement and a clear explanation of a failure are useful starting materials. Where your own requirements remain undecided, identify the engineering choice you want a sample to resolve. That keeps a request for information separate from a requirement the supplier must meet.
Our guide to robot actuators explains the component's role inside a joint. Use that distinction when deciding whether to buy an integrated unit or assemble a joint from separate parts.

How do you build a useful supplier shortlist?
Build the shortlist around a component family and the supplier's role in making it. A company selling an assembled joint, a specialist producing its reducer and a distributor supplying imported parts will answer different questions and take responsibility for different failures.
In our database of 7,000+ robotics companies, we have 7,320 company records worldwide, including 1,597 classified as Components. At Asiabits, that gives us a broad starting set for research. For an individual sourcing decision, the useful work is to identify which companies make the relevant product and can discuss your application with an engineer.
Ask who owns the design, which operations happen in-house and which parts come from other suppliers. Then identify the legal entity providing samples and the entity responsible for later deliveries. A sales conversation becomes much clearer once those responsibilities are attached to the actual product.
Compare candidates at the same level of assembly. An actuator with electronics and a bare mechanical transmission create different integration work. Put the missing work beside each proposal so your team can see what it would still need to develop, source or test.
Keep a small number of technically relevant candidates for detailed discussions. Each should have a reason to be there: a suitable architecture, an identified manufacturing capability or a credible route to adapting the product. Our overview of German suppliers and Chinese humanoid components looks at the broader partnership opportunity; qualification brings that opportunity down to a specific part.
What should a sample test establish?
A sample test should establish whether the proposed configuration meets your agreed requirements and reveal the integration work still needed. Write the test plan before the sample arrives, with a named engineer responsible for interpreting the result.
Use the same operating profile for competing products. Record the hardware configuration, software version and relevant settings. If one supplier changes a limit during testing, keep that change in the record and understand its effect. Otherwise, results that appear comparable may describe different conditions.
For an actuator, examine performance during repeated motion as well as at the start of a test. Record temperature alongside the task result. For a sensor, compare measurements against your reference and check behaviour after the changes in conditions that matter to your application. These are proposed checks to adapt with your engineers, rather than a universal qualification standard.
Include failure and recovery behaviour. Decide what your controller should receive when communication drops or a component reports a fault. Check how the supplier's documentation explains that behaviour and whether your team can reproduce it on the bench. Recovery instructions belong in the technical assessment because somebody will eventually have to use them.
Retain the tested samples and their identifiers where practical. If a later delivery behaves differently, the original unit gives the engineers a reference for comparison. Agree how long the supplier will retain the corresponding records and how your team can request them.
End the test with a decision tied to the observations. You may proceed to an integrated prototype, request a specific redesign or rule out the part for this application. A useful report explains the reason and identifies what would have to change before a failed candidate could be reconsidered.
How do you check production consistency?
Check how the supplier will keep delivered parts consistent with the configuration you tested. The connection between an approved sample and later production is a separate engineering question, with its own evidence.
During a factory discussion, follow the component through the operations that affect its performance. Ask where critical dimensions are measured, how test results are linked to a delivered unit and what happens when a result falls outside the accepted range. Request an example record with confidential customer details removed.
Use a specific hypothetical failure to make the discussion practical. If a joint develops unexpected play after integration, what information would the supplier ask for? Could it trace the unit to its production and test records? Who would examine the returned component, and how would the findings reach your engineering team?
Also ask how design changes are communicated. A changed connector, firmware revision or substitute material can affect your own assembly and validation. Establish which changes need your review and how the approved configuration will be identified on orders and deliveries. Keep that information together so purchasing and engineering work from the same reference.
For an on-site review, our robotics factory visit guide helps structure the wider discussion. Give the component's actual manufacturing and test process enough time within the visit.
Who should own integration and ongoing support?
Assign an engineering owner on each side and agree how they will resolve problems during integration. The first technical exchange should make clear who can change the product, who can explain its interfaces and who will answer questions after a sample ships.
Send a focused issue report when a problem appears. Include the configuration, operating conditions and a reproducible description of the behaviour. Ask for an explanation your engineers can test. This makes communication useful across languages and prevents a long exchange of videos with different assumptions behind them.
A current example of deeper industrial cooperation is German motion technology supplier Schaeffler's partnership with Chinese humanoid developer Leju Robotics. Its March 2026 announcement describes cooperation on industrial applications and manufacturing. Schaeffler's October announcement of its Taicang factory brings component production, robot training and industrial testing together at one site.
For a smaller robot builder, the practical lesson is to connect the component supplier with the application team early. A part's performance, the manufacturing process behind it and the way the robot uses it need to be discussed together. You can start that exchange with a focused sample programme.
When is a supplier ready for the next commitment?
A supplier is ready for the next commitment when your team can explain what has been demonstrated, what remains to be resolved and who will do that work. Match the commitment to the evidence you have.
Before an integrated prototype, confirm the sample configuration and the support needed to install it. Before a larger batch, review consistency across the units tested and unresolved changes. Before production purchasing, make sure engineering and procurement agree on the accepted configuration, documentation and delivery responsibilities.
Keep a short decision record that survives staff changes. It should contain the requirement, the relevant test result, the remaining issue and the next agreed action. This gives a later reviewer a way to understand why the supplier was selected without reconstructing months of messages.
Asiabits helps European teams research Chinese robotics companies and organise focused company visits. For a component sourcing programme, start with the part you are evaluating and the decision your engineers need to make. That brief lets us select relevant discussions and help the visiting team communicate its requirements.
Frequently asked questions
How do European robot makers qualify Chinese component suppliers?
Define the component's operating requirements, test the proposed configuration and review how production will reproduce it. Assign engineering contacts and use the findings to decide whether to proceed to an integrated prototype or further development.
What information should a robotics component sourcing brief include?
Include the required function, physical and electrical interfaces, operating conditions and the test that will establish suitability. Identify undecided requirements so the supplier can distinguish a development question from an acceptance condition.
Is a successful sample enough to approve a production supplier?
A successful sample establishes performance under the conditions tested. Production approval also requires evidence about consistency, traceability, configuration changes and the support available during integration.
What should engineers review during a Chinese component factory visit?
Follow the relevant component through its manufacturing and test process. Examine how measurements are linked to delivered units, how rejected parts are handled and how design changes reach the customer.
Get These Insights Every Monday
Join 18,000+ professionals reading Asiabits. Free, every Monday, straight from Shanghai.
Subscribe Free →
